Floor lamp maintenance - moisture proof
First of all, we need to maintain the floor lamp to prevent moisture. The most worrying thing about electrical appliances is moisture, which will reduce the service life and also have electrical danger. Therefore, the key step of floor lamp maintenance is moisture-proof, whether it is placed in the living room or in the bathroom. The bathroom lighting and the kitchen stove light should be installed with a moisture-proof lampshade to prevent moisture intrusion and cause rust damage or short circuit leakage.
Floor lamp maintenance - dust removal
In the next step, we should carry out dust removal, and the floor lamp maintenance should be carried out often with dust treatment, especially the lampshade of the floor lamp. The lamp cover is easy to accumulate the ash layer and cause darkening, which affects the lighting effect. Therefore, it is necessary to clean frequently and clean the floor lamp cover. Use a clean feather duster to gently sweep the dust, do not let the lampshade deform, usually clean it with a clean feather duster to gently remove the dust, be very careful, if the metal lighting is wiped with a dry cloth, do not Dip in water.
Floor lamp maintenance - do not switch frequently
Of course, in addition to maintenance, we must do not switch frequently. We should try not to switch frequently when using the lighting, because the lighting is at the moment of frequent starting, the current through the filament is greater than the current during normal operation, making the filament temperature A sharp rise accelerates the sublimation, which will greatly reduce its service life, which is also a point to be paid attention to in all lighting maintenance.
Floor lamp maintenance - precautions
When cleaning and maintenance, first disconnect the connected power supply, and at the same time, be careful not to change the structure of the lighting, and do not replace the lighting parts casually. After cleaning and maintenance, the lighting should be installed as it is. Do not miss or misplace the lighting. Parts to avoid danger. At the same time, as far as possible, the lamp should not be washed with water. Just wipe it with a dry cloth and wipe it with water. If it is accidentally touched, try to dry it as much as possible. Do not wipe it with a damp cloth immediately after turning on the light.
