How To Choose The Right Eye Protection Table Lamp, These Four Main Points To Know. 2

Oct 02, 2019

Leave a message

Second, see glare

Glare refers to the glare of the light from the eye protection lamp. If it is used as a light source, it is extremely prone to glare when the brightness is too high. If the light source is closer to the eye, the more obvious the reaction is, the more obvious the glare is. Therefore, many eye protection lamps are designed to be outside the lamp with some shading while maintaining brightness. Therefore, when you buy, you should turn on the light, check if the next fiber is too glaring, whether the design is reasonable, and the light should be sufficient.

Third, look at the color rendering

The word color is used in the eye-protection lamp to indicate the original degree of the color of the object that we are lighting. If the object is warm yellow, it is light yellow when it is illuminated by the eye-protection lamp. The chromaticity is not good, so you can choose a reference object at the time of purchase to see if the color difference is small and the color rendering is good.

Fourth, look at the blue light

Blu-ray is actually harmful to the eyes, and it is very harmful to the retina. Therefore, when we choose eye-protection, it is best to choose low-light. Most children are less able to accept blue light than adults, which will ruin the eyes, so the most direct way is to see if there is a CQC mark on the lamp, if it is more secure.

The above four points are all for everyone's attention when buying eye protection. I also hope that everyone can find a safe eye protection lamp to protect the window of their own mind.

Send Inquiry