Today's chandeliers are not just lighting fixtures, but they are also interior decorations, and the installation of various chandeliers is not so easy.
1. Follow the instructions to unpack and inspect the parts.
Because the chandelier belongs to lighting and decorative lamps, it also contains many accessories. It's not very familiar. Novice installers can check the parts against the bulb's installation instructions. If you find the wrong place, you can contact the merchant in time. If the lighting installation host is unpacked, the customer must be present, and installation is only guaranteed if there is no problem with the lighting.
2. Installation of the chandelier
(1) First assemble the lamp body of the chandelier with the surrounding lamp arm (where the lamp is installed).
(2) After removing the light body strip as shown in the picture above, you can see where the light arm can be connected. After connecting the lamp arms, the lamp arms must be fixed one by one with a wrench, and the lamp arms need to be evenly distributed after installation, otherwise, the installation is complete. The chandelier will be angled towards the heavier side of the light arm.
(3) Correctly connect the various wires on the lamp arm. Do not connect the wrong one. Otherwise, if a bulb is installed, one of the arms is found to be off and needs to be removed for maintenance.
(4) The slings and slings of the lamp body and the chandelier are installed. At this point, basically, assemble the chandelier, then install the base (i.e. the top plate).
(5) Install the ceiling lamp holder in the determined installation position. The installation method is similar to the installation method of ceiling lamps. First, press the lamp holder on the hole to pull out the hole, then use a drill to drill the hole and install the expansion screw. Fix the lamp holder.
(6) Connect the main power supply reserved for the ceiling to the chandelier power supply.
(7) Then adjust the assembly height of the chandelier and assemble the accessories (glass bowl and housing) above the lamp arm.
(8) Finally, install the decorative cover (that is, the cover on the base), and then turn on the test power to see if the chandelier starts normally.
