1. Before installation, carefully read the installation drawings and the product manual of the floor lamp, and prepare common tools for lamp installation, such as flat-mouth Phillips screwdrivers, hammers, etc. Before installing the floor lamp, carefully check the installation drawings, prepare tools according to the requirements of the installation drawings, such as hammers, screwdrivers, etc., then unpack the packaging, and place the various objects. Do not mix them up, otherwise the later installation may be wrong. .
2. Check whether all objects are damaged. If there is damage, contact the merchant in time. If there is no damage, check the hole position of the object and install the floor lamp according to the drawing. When installing, it should be noted that the wrong parts are not repeatedly screwed together, because the floor lamp installed in this way is easy to tilt, and it will shake left and right after being touched for a long time.
3. The floor lamp should have a cast iron bottom basin. When installing, pay attention to the stability of the chassis and the order of installation. Install the basin first, and then install the lamp pole, lamp holder, lampshade and light bulb.
4. After the floor lamp is installed, you need to turn on the switch to check whether it is lighting normally. If it cannot work normally, you need to check and debug step by step until the power is turned on and it can work normally.
